P|U|L|S|T|E|R - Psion Teklogix Shop - www.Pulster.de

Imager

Psion Teklogix Workabout PRO

Imager

Psion Teklogix Workabout MX

Psion Teklogix EP10

Psion Teklogix Ikon

Psion Teklogix NEO

Psion Teklogix 7535

Psion Teklogix 7000

Psion Teklogix 8000

Psion Teklogix 9000

Psion Teklogix Netpad

Psion Teklogix HC Range

Psion

Sharp

Nanonote

OpenMoko

Home --> Psion Teklogix Workabout PRO --> Imager

Psion Teklogix Workabout PRO - Imager 1D - WA9003

Psion Teklogix Workabout PRO - Imager Extension.

Psion Art.No.: WA9003 "Imager 1D EV15 xMod".

Easy installation on backplate of Workabout PRO.

Technical specs: Intermec EV15 Datasheet (link)

Reads these codes: UPC (E&A), EAN, Code 11, Code 39, Code 128, UCC EAN 128, ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5, Codabar, Code 93, MSI, Plessey, and Telepen symbologies. Scan range: max. 25cm.

This scan modul is supported from Workabout ROM, so no need of drivers.

Imager WA9003 works fine with pistol grip WA6101, which can be ordered below.

Imager fits to all Workabout variants 7525S/C G1, 7527S/C G2+G3.

This imager is the right choice if you want to scan with pistol grip.

What you get: imager module, screws and installation manual.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO - Imager 2D - WA9007 - Special offer

Psion Teklogix Workabout PRO - 2D Imager Extension.

Psion Art.No. WA9007 "Imager 2D Slim Pod SX5393".

Easy installation on backplate of Workabout PRO.

Technical specs: Symagery SX5393 (Link)

Imager fits to all Workabout variants 7525S/C, 7527S/C and all Generation G1/G2/G3. All Systems CE4+5, WM5+6,. not WM2003.

This imager is the right choice if you want to scan 1D and 2D and dont need a pistol grip.

What you get: imager module and installation manual.

Genuine Teklogix product, very good condition, 1 year warranty, in stock, ready to ship.

Teklogix list price 560 eur ex.VAT - grab a bargain here.

Quantity:

Psion Teklogix Workabout PRO - Imager 2D - WA9010

Psion Teklogix Workabout PRO - 2D Imager Extension.

Psion Art.No. WA9010 "Imager 2D Symagery SX5393", P/N: 1050104.

Easy installation on backplate of Workabout PRO.

Technical specs: Symagery SX5393 (Link)

Reads these Code 1D: Code 39, 128, UPC, EAN, Interleaved 2of5, Codabar, RSS and these Codes 2D: PDF417, microPDF417, Composite, Data Matrix, QR Code, Maxicode, Aztec Code, Planet, Postnet, Royal Mail, postal Codes Australia, Canada, Japan, Korea.

This scan modul is supported from Workabout ROM, so no need of drivers.

Imager WA9010 works fine with pistol grip WA6002, which can be ordered below.

Imager fits to all Workabout variants 7525S/C G1, 7527S/C G2+G3.

This imager is the right choice if you want to scan 1D and 2D with pistol grip.

What you get: imager module, screws and installation manual.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO - Imager 2D - WA9212

Psion Teklogix Workabout PRO - 2D Imager Extension.

Psion Art.No. WA9212-G1 "Imager 2D Slim Pod HHP 5180".

Easy installation on backplate of Workabout PRO.

Specifications: HHP5180 Engine Datasheet (link).

Reads these Codes 1D: Code 39, 128, UPC, EAN, Interleaved 2of5, Codabar, RSS and these Codes 2D: PDF417, microPDF417, Composite, Data Matrix, QR Code, Maxicode, Aztec Code, Planet, Postnet, Royal Mail, postal Codes of Australia, Canada, Japan, Korea.

"Slim Pod" form factor.

This scan modul is supported from Workabout ROM, so no need of drivers.

Imager WA9212 works fine with pistol grip WA6102, which can be ordered below.

Imager fits to all Workabout variants 7525S/C G1, 7527S/C G2+G3.

This imager is the right choice if you need a very slim imager and use a pistolgrip.

What you get: imager module, screws and installation manual.

Genuine Teklogix factory new product, in stock, ready to ship.

SPECIAL OFFER !

Quantity:

Psion Teklogix Workabout PRO - Imager 1D Endcap - WA9113

Psion Teklogix Workabout PRO - Imager Extension for Endcap.

Psion Art.No.: WA9113-G1 "Imager 1D End Cap with GSM Antenna Shroud" resp. Psion Art.No.: WA9103-G1 "Imager 1D End Cap no GSM Antenna Shroud".

This imager will be placed on the top of the unit, just replace endcap with it.

Technical specs: Intermec EV15 Datesheet (link).

This scan modul is supported from Workabout ROM, so no need of drivers.

Imager WA9103 works fine with pistol grip kit WA9300, which can be ordered below.

The end-cap imager WA9103 does not work with GSM radio moduls. Here on offer is WA9113 which can be combinated with GSM radios and extended antennas..

Imager fits to all Workabout variants 7525S/C G1, 7527S/C G2+G3.

This imager is the right choice if you need a scanner attached on the top, and GSM is needed.

What you get: imager module, screws and installation manual.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO Pistol Grip for WA9003 - WA6101

Psion Teklogix Workabout PRO Pistol Grip for imager WA9300.

Psion Art.No. WA6101-G1 "Pistol Grip for Scanners WA9000-G1, WA9005-G1, WA9003-G1p" (replaces former WA6001).

Easy installation on back of Workabout PRO.

For easy grip and hold of unit while scanning. Pressing the trigger enables the scan engine.

On the bottom of the grip theres a extra stylus holder + stylus.

Works fine with all Workabout PRO G1/G2/G3 and Imager WA9300, besides with Scanners Art.No. WA9000/ 9005/ 9006.

What you get: new pistol grip, screws, installation guide.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO Pistol Grip for WA9010 - WA6002

Psion Teklogix Workabout PRO Pistol Grip for imager WA9010.

Psion Art.No.: WA6002 "Pistol Grip for WA9010 (Symagery Imager)".

Easy installation on back of Workabout PRO.

For easy grip and hold of unit while scanning. Pressing the trigger enables the scan engine.

No stylus holder included.

Works fine with Imager WA9010 only and all Workabout PRO G0/G1/G2/G3.

What you get: new pistol grip, screws, installation guide.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO Pistol Grip for WA9212 - WA6102

Psion Teklogix Workabout PRO Pistol Grip for imager WA9212.

Psion Art.No: WA6102 "Pistol Grip for Imagers WA9008 (2D slim Pod HHP 5180), WA9212".

Easy installation on back of Workabout PRO.

For easy grip and hold of unit while scanning. Pressing the trigger enables the scan engine.

No stylus holder included.

Works fine with Imager WA9212 only and all Workabout PRO G1/G2/G3.

What you get: new pistol grip, screws, installation guide.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO Pistol Grip Kit Endcap Imager - WA9300

Psion Teklogix Workabout PRO Pistol Grip for endcap imager.

Psion Art.Nr. WA9300 "Pistol Grip Flush Mount Kit for Scanner End Cap SE955/EV15".

Easy installation on back of Workabout PRO. The kit comes with a modified trigger backplate, which connects to the scan engine.

For easy grip and hold of unit while scanning. Pressing the trigger enables the scan engine.

Works fine with Workabout PRO G2 only and Endcap Imager Art.No. WA9103-G1 und WA9113-G1 (imager G0 variants do not work!).

Pistol grip (without backplate kit) can be ordered separately as WA6103 below.

What you get: new pistol grip kit, installation guide.

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity:

Psion Teklogix Workabout PRO Pistol Grip Endcap Imager - WA6103

Psion Teklogix Workabout PRO Pistolgrip for endcap Imager.

Psion Art.No. WA6103 "Pistol Grip Flush Mount".

Pistolengrip which is included in the kit WA9300, here separately available as spare.

What you get: pistolgrip (no backplate kit included).

Genuine Teklogix factory new product, in stock, ready to ship.

Quantity: